The Fluke 1662, 1663 and 1664 FC multi-function testers can be applied to all types of electrical installations to ensure the safety of both people and final mechanisms. It must be said that these are applicable to different circumstances and facilities, having a great value for both domestic and industrial or commercial use.
All the available models have been specially designed in order to guarantee the optimal state of the fixed wiring installations. As a consequence, these are also useful to ensure that such facilities comply with the requirements imposed by IEC 60364 and the rest of established local regulations.
Although all the models have different characteristics, they all adapt perfectly to the needs of each person. It is also important to point out that, like the rest of the products manufactured by the brand, they comply with high quality standards that guarantee their optimal functioning throughout their useful life.
In addition, as a final complement, the three models are accompanied by a variety of accessories such as a strong power cable with a single input connector, a hard case, a remote control probe and an adapter for compensation.
Available in different versions depending on the needs required for its use.
The available variations that can be presented in the different models of this series are shown in the corresponding sheet for each one of them.
All models have common characteristics such as:
TRMS voltage (AC and DC) and frequency
Wiring polarity tester detects broken PE and N cables
Continuity and resistance
Measures in the motor windings with continuity check (@ 10 mA)
Loop and line resistance
Predictable ground fault failure (PEFC / IK)
Predictable short-circuit current (PSC / IK)
RCD firing time
Current flow of switches by differential current (ramp check)
Measures the trip time and RCD current of type A and CA in a single test
RCD variable test current
RCD automatic test sequence
Phase sequence check
Automatic start switchable On / Off for RCD and loop test
Services: EC / EN61557-1 to IEC / EN61557-7 and IEC / EN61557-10
Overvoltage: CAT III 500 V, CAT IV 300 V
Security: Meets IEC / EN61010-1, UL61010, ANSI / ISA -s82.02.01 and CAN / CSA c22.2 No. 1010
Sealing: IP 40
Dimensions (mm): 100 long x 250 wide x 125 high
Weight (batteries included) approx. 1.3 kg
The final price of the product varies according to the characteristics of each of the offered versions.
For more information contact us through our contact